We Sell 6AL-4V ELI (Gr 23) Titanium in rod, sheet, and cut plate.
6Al-4V ELI is one of the most widely used Titanium alloys in the medical industry. It is certified to ASTM F136, and commonly referred to as implant grade 6-4 Titanium. It's properties of biocompatibility, corrosion resistance, high strength, and toughness make it especially suitable for implants and other medical devices.
The main difference between Ti-6Al-4V ELI (Grade 23) and Ti-6Al-4V (Grade 5) is that in ELI (Extra Low Interstitials) the maximum oxygen content is lowered to 0.13%. This gives the material an improved fracture toughness.
Among it's uses in the medical industry are:
- Orthopedic implants
- Bone and Joint Replacement
- Dental root implants
- Surgical Clips
- Cryogenic Vessels
6AL-4V ELI is also referred to as:
- Grade 23 Titanium
- ASTM F136
Chemical Data, Mechanical Properties and Specifications for 6AL-4V ELI (Gr 23) Titanium
| Chemical Range for 6AL-4V ELI | ||
|---|---|---|
| Element | Minimum | Maximum |
| Carbon | -- | 0.08 |
| Nitrogen | -- | 0.05 |
| Hydrogen | -- | 0.012 |
| Iron | -- | 0.25 |
| Oxygen | -- | 0.13 |
| Aluminum | 5.5 | 6.5 |
| Vanadium | 3.5 | 4.5 |
| Titanium | -- | Balance |
| Typical Mechanical Properties for 6AL-4V ELI | |||
|---|---|---|---|
| Form | Tensile Strength, min | Yield Strength, min | Elongation in 4D, min |
| Strip, Sheet and Plate-ASTM B265 | 120 ksi | 110 ksi | 10% |
| Bar and Rod-ASTM B348 | 120 ksi | 110 ksi | <1.0" 7.5%, =1.0" 6.0% |
| Typical Physical Data for 6AL-4V ELI | |
|---|---|
| Density | 0.160 lb / cu. in. |
| Electrical Resistivity | 1.71 µohms-m |
| Thermal Conductivity | 6.6-6.8 W/mK |
| Modulus of Elasticity | 16.5 psi x 10(6) |
| Specifications |
| ASTM B265-Gr23 (Sheet-Industrial) |
| ASTM B348-Gr23 (Bar-Industrial) |
| ASTM F136 (Medical) |
| AMS 4907 (Aerospace Sheet) |
| AMS 4930 (Aerospace Bar) |
| AMS-T 9046A AB-2 (Aerospace Sheet) |
| AMS-T 9047A AB-2 (Aerospace Bar) |
| MIL-T 9047J AB-2 (Aerospace Sheet) |
| MIL-T 9047G AB-2 (Aerospace Bar) |
| UNS R56401 |
